13933723860 18132911222
网站首页 关于我们
产品中心
行业动态
应用场景
机械知识
视频展示
资质荣誉
在线留言
联系我们

机械知识

当前位置:首页>机械知识

二次构造柱注浆泵的特点 

发布时间:2017/03/16

  二次构造柱注浆泵的特点:
  column grouting pump:
  1.机械化程度高,需要的劳动力少,施工组织简单。
  1 high degree of mechanization, the need for less labor, simple construction organization.
  2.混凝土的输送和浇注作业是连续的,施工效率高,工程进度快。
  2 concrete transportation and pouring operation is continuous, the construction efficiency is high, the progress of the project.
  3.泵送工艺对混凝土质量要求比较严格,也可以说泵送是对混凝土质量的一次检验 ?。又由于泵送是连续进行的,泵送中混凝土不易离析,混凝土坍落度损失不大, ?因此容易保证工程质量。
  3 Pumping Technology for more stringent quality requirements of concrete pumping, can also be said to be a test of concrete quality. Because the pump is continuous, pumping concrete in less segregation, slump loss of concrete is not so easy to ensure the quality of the project.
  4.作业安全。
  4 job security.
  5.对施工作业面的适应性强,作业范围广,混凝土输送管道可以铺设到其它难以到 ?达的地方,又能使混凝土在一定压力下充填浇注到位,还可以把泵串联使用,以 ?增大输送距离和高度,满足各种施工的要求。
  5.The construction work of strong adaptability, wide operating range, the concrete pipeline can be laid to the other to reach to place, and can make the concrete in place under certain pressure filling casting, can also be used to pump in series, increasing transmission distance and height to, meet various construction requirements.
  6.与其它施工机械的相互干扰小。在泵送的同时,输送管附近可以进行其它施工作业。
  6 interference with other construction machinery. In the pumping and conveying pipe can be applied in other work near industry.
  7.在正常泵送条件下,混凝土在管道中输送不会污染环境,能实现文明施工。
  7 in the normal pumping conditions, the concrete in the pipeline transport will not pollute the environment, to achieve civilized construction.
  8.在施工布置得当的条件下,能够降低工程造价。Characteristics of the two structural
  8 under the condition of proper arrangement of construction, the construction cost can be reduced.

同升彩票